Guidelines
STL File Required: To 3D print using any of the following 3D printers, your design must be in a .STL file format.
Software & Resources: A simple 3D modeling resource is Tinkercad.com. If you’re looking for pre-designed 3D prints, search Thingiverse.com.
Quota/Limitations: Use of the free filament provided in the MakerSpace is limited to 150 grams per print or 200 grams per week. If print weight exceeds these amounts, you must provide your own filament. When supplying filament, please ensure to note the filament diameter size based on the equipment. Filament can be purchased at the Syracuse University Campus Store. Note, manufacturing products for commercial use is prohibited and multiple copies must be approved by a team member.
3D Pens: MYNT3D
- Quantity: 2
- Compatible Filament Materials:
- PLA – Polylactic Acid
- ABS – Acrylonitrile Butadiene Styrene
- Filament Diameter: 1.75 mm
Anet A8
- Quantity: 10
- Compatible Filament Materials:
- PLA – Polylactic Acid
- ABS – Acrylonitrile Butadiene Styrene
- Nylon
- Flexible
- Filament Diameter: 1.75 mm
- Number of Extruders: 1 – Single
- Build volume:
- Millimeters: 220mm L x 220mm W x 230 mm H
Anycubic Photon Mono SE
- Quantity: 1
- Compatible Filament Materials:
- Resin
- Number of Extruders: 1 – Single
- Build volume:
- Millimeters: 130 mm L x 78 mm W x 160 mm H
Anycubic Photon Mono X2
- Quantity: 1
- Compatible Filament Materials:
- Resin
- Number of Extruders: 1 – Single
- Build volume:
- Millimeters: 200 mm L x 196 mm W x 122 mm H
Dremel 3D40
- Quantity: 2
- Compatible Filament Materials:
- PLA – Polylactic Acid
- Nylon
- Filament Diameter: 1.75 mm
- Number of Extruders: 1 – Single
- Build volume:
- Millimeters: 250 mm L x 160 mm W x 160 MM H
Dremel 3D45
- Quantity: 2
- Compatible Filament Materials:
- PLA – Polylactic Acid
- ABS – Acrylonitrile Butadiene Styrene
- Nylon
- Filament Diameter: 1.75 mm
- Number of Extruders: 1 – Single
- Build volume:
- Millimeters: 250 mm L x 160 mm W x 160 MM H
Filabot Filament Maker
- Quantity: 1
- Compatible Filament Materials:
- PLA – Polylactic Acid
- ABS – Acrylonitrile Butadiene Styrene
Frankie Custom – Fusion MakerGear & Alunar
- Quantity: 2
- Compatible Filament Materials:
- PLA – Polylactic Acid
- ABS – Acrylonitrile Butadiene Styrene
- Nylon
- Filament Diameter: 1.75 mm
- Number of Extruders: 1 – Single
- Build volume:
- Millimeters: 254 mm L x 254 mm W x 254 MM H
MakerBot Replicator 2
- Quantity: 1
- Compatible Filament Materials:
- PLA – Polylactic Acid
- Filament Diameter: 1.75 mm
- Number of Extruders: 1 – Single
- Build volume:
- Inches: 11.22 in. L x 6.02 in. W x 6.1 in. H
MakerBot Replicator 2X
- Quantity: 1
- Compatible Filament Materials:
- PLA – Polylactic Acid
- ABS – Acrylonitrile Butadiene Styrene
- Filament Diameter: 1.75 mm
- Number of Extruders: 2 – Dual
- Build volume:
- Inches: 9.7 in. L x 6.0 in. W x 6.1 in. H
MakerGear M2
- Quantity: 2
- Compatible Filament Materials:
- PLA – Polylactic Acid
- ABS – Acrylonitrile Butadiene Styrene
- Nylon
- Flexible
- Filament Diameter: 1.75 mm
- Number of Extruders: 1 – Single
- Build volume:
- Inches: 10 in. L x 8 in. W x 8 in. H
- Millimeters: 250 mm L x 200 mm W x 200 mm H
re:3D Gigabot 2
- Quantity: 1
- Compatible Filament Materials:
- PLA – Polylactic Acid
- ABS – Acrylonitrile Butadiene Styrene
- Nylon
- Flexible
- Filament Diameter: 2.85 mm
- Number of Extruders: 1 – Single
- Build volume:
- Inches.: 23.2 in. L x 23.6 in. W x 23.6 in. H
- Millimeters: 590 mm L x 600 mm W x 600 mm H
re:3D Gigabot 3+
- Quantity: 1
- Compatible Filament Materials:
- PLA – Polylactic Acid
- ABS – Acrylonitrile Butadiene Styrene
- Nylon
- Flexible
- Filament Diameter: 2.85 mm
- Number of Extruders: 2 – Dual
- Build volume:
- Inches.: 23.2 in. L x 23.6 in. W x 23.6 in. H
- Millimeters: 590mm L x 600mm W x 600mm H
Stratasys Mojo
- Quantity: 1
- Compatible Filament Materials:
- ABS – Acrylonitrile Butadiene Styrene
- Filament Diameter: 1.75 mm
- Number of Extruders: 1 – Single
- Build volume:
- Millimeters: 127 mm L x 127 mm W x 127 mm H